Pro Scooter blog
Hey there! We get quite a few questions similar to this:
"My son/daughter wants to build a custom scooter. Is that possible? Are all the parts compatible? What parts are needed?"
If this is you, or you're the son/daughter, we can help. This first article will focus on what parts you need to build your own custom pro scooter. Future posts will cover more details about each of the parts, like bars, forks and decks. So let's get started...
Here's the quick list of parts you'll need. Additional info can be found below.
- Clamp or compression system
Deck - the part of the scooter that you stand on. Most custom builds start with the deck and the build out from there. Things to consider; width, length, boxed-end or not.
Fork - does two things; holds the bars so you can turn and holds the front wheel. Two basic types of forks; HIC/SCS or IHC. Don't get caught up in the acronyms. Just remember this: HIC/SCS goes with oversized bars, IHC goes with either standard sized bars or aluminum bars.
Headset - bearings/spacers/dust cover all to help the bars spin smoothly. Almost all are compatible across brands. Most come with a spacer for HIC/SCS forks. IHC forks typically come with their own headset spacer.
Wheels - no explanation needed, right? Well...Things to consider; diameter size (100mm, 110mm, 120mm, 125mm), rim type (spoked, hollow core, full core), bearings (measured by ABEC tolerance). Decks and forks need to support the diameter size.
Bars - what you use to steer your scooter. Things to consider: Height, width, material (steel, titanium, aluminum), straight Tbar or with design, backsweep or not. Forks and bars need to be compatible. Remember the fork note: Oversized bars go with HIC/SCS forks, standard size and aluminum bars go with IHC forks.
Grips - the soft rubber things that you hold onto. These slide on to your bars. Things to consider; length, thickness, softness.
Griptape - sandpaper-like material that adheres to the deck and keeps your feet from sliding off the deck. Things to consider; width, length, gritty-ness, color, design.
Clamp or compression system - the part that secures the bars to the fork. Things to consider; outside diameter of your bars. For clamps, oversized clamps fit oversized bars or aluminum bars. Standard-sized clamps fit standard-sized diameter bars. Another type of system is called SCS and this system includes both the clamping mechanism and the system that secures the bars.
Headsets are common sizes and fit 99.9% of all decks.
Aluminum bars are STANDARD sized on the inside and OVERSIZED on the outside. Most customs that use aluminum bars use an IHC fork and an oversized clamp.
Grips come with bar ends. Some grips come with two sets of bar ends; a set for aluminum bars and another set for all other bars.
OK, let's stop here. We've thrown a lot of info at you. Read over it again. And call if you have questions.
Pro Scooter Shop team
Welcome! We'll keep you updated on the pro scooter scene here in the beautiful Pacific Northwest! Hit us up with questions, or if you know of an event, let us know.
2020Wednesday, June 24th
- Sammamish Scooter Competition
- Details tbd
Saturday, July 25th
- The Muk Games at the YMCA in Mukilteo
- Details tbd
Saturday, June 1st, 2019
Join us for a free ride event at the Bellevue Skatepark outdoor plaza. Shred with other riders, enjoy some BBQ'ed hotdogs and drinks, and register for the raffle!
Location: 14224 Bel-Red Rd, Bellevue, WA 98007
Saturday, July 20th, 2019
Pacific Northwest's best and biggest pro scooter competition! 5th Annual The Muk Games sponsored by the YMCA Mukilteo and the Pro Scooter Shop.
Location: 10601 47th Pl W, Mukilteo, WA 98275
Fee: $15 YMCA pass holders/$25 for all other contestants (includes lunch)
Saturday, August 17th/Sunday, August 18th, 2019
Saturday, August 24th/Sunday, August 25th, 2019
Wednesday, August 28th, 2019
Sammamish Pro Scooter competition!
Location: 801 228th Ave SE, Sammamish, WA 98075
Registration opens at 4:30pm, competition starts at 5pm
Fee: $5 for contestants, must sign waiver
Pacific Scooter Experience scooter competition! Bringing back a local comp at the indoor scooter park in Redmond, WA. Perfect indoor venue for the younger riders to get a taste of fun competition. But also rugged enough to challenge the local riders to showcase their skills.
Location: 14766 NE 95th St, Redmond, WA 98052
Fee: $10 for contestants
In our local world of too much traffic, crowded parking lots, and almost fanatical desire to be kind to Mother Earth, we’re always on the lookout for alternatives to commuting. So what’s trending now might surprise you: Scooters.
Yep, Scooters. They’ve been around for decades but have always played second fiddle to skateboards and bikes. Not anymore. With the introduction of pro scooters several years ago, they have taken off globally as a sport, and are quickly becoming the recreational choice for kids and teens at the local skate parks.
And now they can also help you get to work.
Young professionals are beginning to use scooters to travel between office buildings in Redmond, Bellevue and Seattle. The scooter’s compact design makes it easy to pack up when not in use or when hopping on the bus, which makes the link between home and the bus quicker and easier. And these aren’t electric scooters. Instead, they rely on good old-fashioned foot power. But far from old-fashioned, these new scooters have an attitude.
We caught up with Aaron, a local Creative Director, who rides the 5Starr Rebel: “I have to say, I love the urban scooters. There so much fun to get around town on. That in and of itself is worth it.”
Today’s scooters are a larger, more stable version of the kid’s scooters: taller handle bars, a wider deck to stand on, and larger wheels that tolerate uneven surfaces better. Some even come with beverage holders.
If you’re looking for something that will turn heads, then the Urban, or Dirt Scooter, is for you. Built from high-grade metal with rugged tires and a healthy dose of attitude.
Looking for something a little more conservative? We're now carrying a line of adult scooters by Globber. Check out this video:
S1 LIFER HELMET GREAT FIT + LIGHTWEIGHT + CERTIFIED PROTECTION = S1 LIFER HELMET
In 2010 we noticed some pro skateboarders and roller derby players were getting knocked out and in some instances getting traumatic brain injuries in traditional soft foam skate helmets. So we took the soft foam helmets into the testing lab and learned that the impact energy goes directly through the soft foam helmets and rattles the brain. We also learned that soft foam skate helmets FAIL the ASTM multiple impact test and they FAIL the CPSC high impact test.
So we set out to make a better and safer helmet. We came up with the S1 Lifer Helmet. The S1 Lifer Helmet is constructed with EPS Fusion Foam and is 5x more protective than soft foam skate helmets. The S1 Lifer Helmet passes the ASTM multiple impact test and the CPSC high impact test.
We have taken steps to educate the public about the S1 Lifer Helmet through videos and printed media but most skaters and parents did not know that traditional skate helmets did not pass any helmet safety standards. They usually only learned the difference after a head injury and that is too late. A Mom who watched her 15 year old son get knocked out for 5 minutes in the bottom of a pool while wearing a soft foam helmet later said to me, “I didn’t know there was a difference between the S1 Lifer Helmet and soft foam skate helmets. We bought the soft foam helmet at a local retailer and just figured it was a good helmet. I really wish I knew before.”
We made a helmet that we would want to wear and that we could 100% recommend to family, friends and team riders. When you are wearing an S1 Lifer Helmet you know that you are wearing the best and if you own a retail shop you know you are offering the best to your customers. – Dan McCashin Co Founder / S1 HELMETS
Welcome (or welcome back)! A few updates on what's new or new again. And wow, 2020!
But first, the background...
"What is the right entry level pro scooter for my kid?"
We get a lot of questions in our Redmond, WA, scooter shop about the best entry level scooters. A good question so thought it would be good to provide some input. Let's start with defining what 'entry level' or beginner scooter means.
We define a 'pro scooter' as having these characteristics:
- Metal core wheels - can be solid core, honeycomb or spoked. Just as long as they're metal
- Sealed bearings in the wheels and the headset
- Solid state - meaning they don't fold up, the bars don't adjust
Most of the time, this question comes from the parent/parents of the younger riders, say 7-11 years old, with little or no scooter experience. For the most part, the entry level scooters are capable of performing the same tricks as the mid- and higher end scooters. The difference can be in the size of the bars, usually lower (shorter) and not as wide (for the slimmer shoulders on younger riders).
Another difference is usually the scooter wheel size, which is generally 100mm on the entry levels. The larger scooter wheels, 110mm and 120mm, offer a little more speed and higher clearance from the ground to the scooter deck. The wheels can be customized, allowing the entry level rider to make simple changes that set their scooter apart from their friend's scooters.
NOTE: While newer decks and forks generally support larger wheels, if you're not sure, just ask. Some older decks and forks, and some smaller completes, may not support 120mm wheels.
For bar height, defined as where the top of the scooter bars hit the scooter rider, in general they like the bars to be between waist and belly button when standing on the scooter. Younger riders can ride with slightly taller bars, allowing for them to grow with the scooter. Here's another chart that gets more specific.
Read the chart like this:
- Average distance between the bottom of the front wheel to the bottom of the bars is 9-10".
- Add to that the height of the bars on the scooter (example: 20")
- This number is the total distance, in inches, from the wheel to the top of the bars. (example: 9" + 20" = 29")
- Now measure your kid from bottom of shoes up 29"
- This is where the top of the bars would reach on your kid
Finally, I'm giving you averages and generalizations. Some kids are ok with shorter bars, some like taller. The best thing to do is have your kid try out the different sizes.
Let's talk about prices. No surprise, but the entry level scooters are less expensive than higher end scooters. But that doesn't mean less quality. The decks are rugged and have great looking designs. Some brands even come with a 'sticker pack' so your rider can customize his or her scooter. Bars and grips are also well made and look good, but again, these can be customized (replaced) on most scooters.
Quick highlights, and then I'll fill in details over the next few weeks as the new products arrive. But don't feel like you (or more likely, your young shredder) needs to have the latest and greatest. What I see most often year over year are subtle changes to previous year's models. Maybe a new bar style, or hollow core wheels, or an improvement in a design. I'll call out changes so you're in the know.
1/22/2020 - many of the top selling mini or smaller scooters are out of stock, like the Lucky Recruit. We expect to seem them back in stock in the next couple months. To help, we went on a mini custom build rampage... Check these out (all based off of the Lucky mini Recruit deck).
Let's get to the scooters. The Lucky Recruit has a some minor changes that I like, with the 110mm hollow core wheels being the most significant. Wow, 110mm hollow cores on a mini! Impressive. The colors are still what I'd refer to as 'masculine'...nothing flashy here. But quality...they nailed it.
1/22/2020 - we're sad to see the Lucky Sector5 isn't going to be continued. Hoping Lucky comes up with a super dope replacement.
The Sector5 scooter, also by Lucky Scooters (did you know that?), is still a good beginner. Weighing in at 8lbs so a tiny bit heavier but solid quality at a respectable price. 19.5"x4.25" deck is small-feet friendly. The bars are 22" tall by 20" wide; slightly taller than some others but not too tall. The only downside to this scooter is that the fork does not have the integrated compression screw hole. It uses the 'old style' starnut which might, over time, require some adjustment or replacement.
Lucky Scooters - entry level Crew is revamped for 2019! The single most interesting change is in the weight. This new version is 2lbs LIGHTER than the original. And nothing compromised in the quality or sturdiness. How did they do it? Lighter fork (going from HIC to IHC) and aluminum bars. The black neochrome is picture here, but comes in four other tasty flavors.
And if you've been following along for the last several years, I like to end with my favorite mini...the Havoc mini in three super cute colors! 5.9lbs, 17" tall by 16.5" wide bars, 16" long by 4.5" wide deck. Mini is right.
One last thought. As a scooter shop owner, I'd love to 'upsell' you to the next level scooter. As a parent of three kids, I wouldn't spend more on an upgraded scooter until I knew my kids really enjoyed scootering and grew with the sport.
Hope this helps!
Pro Scooter Shop
Envy Scooters and specifically the crazy popular Prodigy. (NOTE: The Prodigy isn't necessary what I'd call an 'entry level' scooter. If you have an above average in height kid, then it is a good option). Envy has just released their Series 8 or S8 models.
While our “sport”, revolving around two hunks of urethane and a couple pieces of metal, increases in popularity, more and more riders from around the world continue to gain interest and join the scene. Throughout the years of growth for the industry, scootering has primarily been dominated by riders and companies based in America, Australia, and western Europe. Recently, however, more groups of riders have begun to spring up on the maps. North Scooters has certainly came straight out of the blue, stunning everyone with their quick and very successful arrival into the big leagues; manufacturing parts on the same level and quality as the very best in the game. Based out of Alberta, Canada, North began to seriously consider making scooters in 2015. Mark Pritchard, owner, launched North with the help of Ethan Howell as his product designer and team manager. Over the past two years, Ethan, also known as “Sneethan” or “Sneeth”, has continued to develop fantastic products including everything from handlebar grips to a variety of five unique complete scooters. The most recent innovation at North Scooters happens to be the new Transit Deck. This deck, coming in at a whopping 5.3 inches wide and either 22 or 23 inches long, is currently one of the biggest decks available on the market. With a variety of color choices, the Transit comes in black, raw, trans-red, forest green, and most importantly the “Junebug”, a teal-ish matte color. Other than colors, the Transit comes with either the basic extruded headtube, a cheaper simpler option, or the beautifully 3D forged headtube, signature for Lachlan Gauchier. As well as making quality scooter parts, North has assembled a team of 12 main team riders, five of which from Canada. The Transit decks are flying off of the shelves just as fast as they are placed on them, so make sure to go get one before they are gone!